ACME/Flame Design
PSI-10Needs reviewAdvanced Combustion via Microgravity Experiments / Flame Design
Needs review: this record is flagged for a manual check. Confirm values against the linked sources before relying on them.
Objectives
- The primary objectives of this flight experiment are: A. Obtain soot-inception limits of quasi-steady normal and inverse spherical diffusion flames as functions of flow rate, Zst, amount of inert (N2 or CO2), and pressure for C2H4 and CH4 flames. Identify the corresponding temperatures in hot regions. Obtain similar limits and temperatures for inverse and normal coflow flames. B. Obtain detailed measurements in quasi-steady normal and inverse spherical diffusion flames for C2H4 and CH4. Determine the effects of flow rate, Zst, amount of N2, and pressure on flame temperature, size, color, and soot volume fraction. Evaluate the possible existence of steady flames. C. Obtain extinction limits as functions of Zst, amount of N2, and pressure for normal and inverse spherical C2H4 and CH4 flames. Identify the corresponding temperatures in hot regions. Identify the presence of radiative or kinetic extinction. Evaluate whether pseudo-flammability limits can be obtained for these flames.
Perform spherical diffusion flame tests in drop towers and aboard the International Space Station. Consider a broad range of reactant dilutions, flow rates and pressures for normal and inverse convection directions. Observe the flames with a broad suite of cameras, radiometers, photomultiplier tubes, and thermocouples.
Conditions
| Parameter | Tested value or range | Unit |
|---|---|---|
| Oxygen | – | % by volume |
| Pressure | – | psi |
| Pressure | – | kPa |
| Airflow | – | cm/s |
| Gravity | Microgravity | |
| Diluents | – | |
| Fuel phase | – | |
| Fuels | – | |
| Sample geometry | – | |
| Sample size | – | as stated |
| Hardware | CIR | |
| Platform | ISS, Drop tower | |
| Years | 1999-2025 |
A dash means the sources do not state the value.
Variables varied
None recorded.
Variables held fixed
None recorded.
Sensors
None recorded.
Findings (0)
No findings are recorded for this investigation.
Tests (0)
No individual tests recorded
The sources for this investigation do not list separate test samples.