PSI-115
PSI-115DetectionNeeds reviewUtilization of the Smoke Aerosol Measurement Experiment Data for Advanced Modeling and Simulation of Smoke Generation in Micro-Gravity
Needs review: this record is flagged for a manual check. Confirm values against the linked sources before relying on them.
Objectives
- The objective of this investigation was to use numerical simulation to explore the influence of gravity on pyrolysis smoke growth from a fundamental perspective. The intention of this effort is to quantify the differences between microgravity and Earth gravity smoke, and to identify the fluid dynamic mechanisms that cause the differences.
The formation and growth of dibutyl-phthalate (DBP) particles in Earth gravity and microgravity environments was simulated. Direct numerical simulation via a Navier-Stokes nodal approach was utlilized. The smoke originates from pyrolysis vapor expelled from a heated sample in a geometry similar to that considered in the SAME experiments. This study considered two cross-flow velocities of sufficiently low speed that buoyancy cannot be neglected in the presence of gravity. Simulations are presented to assess the dependence of particle size distributions on thermophoresis, particle settling, and flow geometry. The final report for this investigation introduces the simulation and modeling methodology, followed by a description of the flow geometry and the parameter space under consideration.The differences in the wake geometry attributable to buoyancy for the lower of two flow speeds was examined. Instantaneous scalar fields were used to describe particle accumulation and growth in the buoyant and non-buoyant wakes that form downstream of the hot vapor source.
Conditions
| Parameter | Tested value or range | Unit |
|---|---|---|
| Oxygen | – | % by volume |
| Pressure | – | psi |
| Pressure | – | kPa |
| Airflow | – | cm/s |
| Gravity | – | |
| Diluents | – | |
| Fuel phase | – | |
| Fuels | – | |
| Sample geometry | – | |
| Sample size | – | as stated |
| Hardware | – | |
| Platform | – | |
| Years | 2017-2019 |
A dash means the sources do not state the value.
Variables varied
None recorded.
Variables held fixed
None recorded.
Sensors
None recorded.
Findings (0)
No findings are recorded for this investigation.
Tests (0)
No individual tests recorded