ACME CLD Flame
PSI-21Needs reviewAdvanced Combustion via Microgravity Experiments / Coflow Laminar Diffusion Flame
Needs review: this record is flagged for a manual check. Confirm values against the linked sources before relying on them.
Objectives
- In order to provide the experimental data needed to allow rigorous testing of computational models at the extremes of the fuel dilution spectrum, we have the following objectives: A) Characterize the behavior of weak coflow diffusion flames of methane and ethylene, as a function of velocity and fuel dilution, through measurement of flame shape, lift-off heights, temperatures and extinction limits. B) Characterize the sooting tendencies of diffusion flames with long residence times, as a function of velocity and fuel dilution, through measurement of flame shape, gas temperatures in the soot-free portion of the flame, soot luminosity, soot temperatures, and soot volume fractions.
ACME CLD Flame project goals include the generation of improved computational models with improved soot sub-models that are effective for both dilute flames and sooting flames that vary from low to high soot loading levels. The enhanced time and spatial scales in a microgravity environment will be important for achieving both goals. Experimentally, we plan to study methane and ethylene diffusion flames over a wide range of test conditions. For the more dilute flames, measurements will be made of flame chemiluminesence of OH* and CH* to observe variations in lift-off height and flame shape as extinction limits are approached. The sooting tendencies of the more fuel-rich flames will be investigated using soot luminosity and laser extinction measurements to determine soot temperatures and soot volume fractions. Flame temperatures in non-sooting regions will be measured using thin-filament pyrometry. Based on observations, modifications can be made to the kinetics and soot model to match better the experimental results. If the overall agreement of the measurements and computations is good, the results of the computations can be “mined” to provide insight on species (and hence chemical processes) that cannot be measured directly using the diagnostics available for the proposed experiment.
Conditions
| Parameter | Tested value or range | Unit |
|---|---|---|
| Oxygen | – | % by volume |
| Pressure | – | psi |
| Pressure | – | kPa |
| Airflow | – | cm/s |
| Gravity | Microgravity | |
| Diluents | – | |
| Fuel phase | – | |
| Fuels | methane, ethylene | |
| Sample geometry | – | |
| Sample size | – | as stated |
| Hardware | CIR | |
| Platform | ISS | |
| Years | 2006-2022 |
A dash means the sources do not state the value.
Variables varied
None recorded.
Variables held fixed
None recorded.
Sensors
None recorded.
Findings (0)
No findings are recorded for this investigation.
Tests (0)
No individual tests recorded