BASS-II
PSI-25PreventionSuppressionDetectionBurning and Suppression of Solids - II
Objectives
- To identify the worst-case flammability conditions for materials in spacecraft environments and compare them to terrestrial screening tests.
- To test the hypothesis that materials in microgravity with adequate ventilation burn as well as or better than in normal gravity under identical conditions.
- To examine how thermal and species fields diverge and lead to microgravity flame extinguishment by varying fuel thickness.
- Evaluate the flammability of Nomex since it is heavily used aboard the International Space Station as a fire barrier
- Burn any unused Burning and Suppression Solids - I (BASS-I) samples, of which there was a single wax candle
- Further understand the mechanisms controlling the spread of flames over the surface of solid combustible materials, particularly in a spacecraft environment
- Determine the effects of microgravity on the spread of flames over polymethylmethacrylate (PMMA) rods of different diameters subjected to different O2 concentrations and low flow velocities
- Study flame growth, spread, and extinction over a composite cotton-fiberglass fabric blend in low-speed concurrent forced flows
- Determine the low-speed quenching flammability boundary of materials as a function of oxygen percentage
- Examine the role of radiation- and solid-phase conductive losses on the flame
- Study spacecraft materials flammability evaluation test methods
- Estimate the temperature rise of the BASS experiment assembly for a worst-case flame for a large thick sample
- Study the ignition, flame growth, flame spread, and extinction limits for solid fuels burning in low-velocity forced flows in microgravity.
- Begin to bridge the gap between the normal gravity NASA-STD-6001 Test #1 method, ground-based microgravity tests, and actual material flammability in microgravity.
- Provide SoFIE PIs with preliminary data to refine Science Requirements.
- Practical, realistic (thicker) fuels in typical geometries will be examined, including slabs, cylinders, and spherical sections.
Solid fuel samples of various geometries (rods, slabs, spheres, and fabrics) were burned in a small flow duct within the Microgravity Science Glovebox on the ISS. Gaseous nitrogen was used to dilute the working volume to achieve reduced oxygen concentrations, and onboard sensors measured oxygen depletion and combustion products.
Conditions
| Parameter | Tested value or range | Unit |
|---|---|---|
| Oxygen | 13.6 to 22.2 | % by volume |
| Pressure | 14.696 | psi |
| Pressure | 101.325 | kPa |
| Airflow | 0 to 55 | cm/s |
| Gravity | Microgravity | |
| Diluents | nitrogen | |
| Fuel phase | Solid | |
| Fuels | polymethylmethacrylate, cotton-fiberglass blended fabric, cellulose, Nomex, wax, PMMA, cotton-fiberglass fabric, Japan Wax, SIBAL, composite fabric, paraffin, Nomex III, SIBAL fabric, candle | |
| Sample geometry | rods, slabs, spheres, and flat fabrics | |
| Sample size | rods of 6.35 to 12.7 mm diameter, slabs of 0.125 to 5 mm thickness, 4-cm-diameter spheres, and 1 to 2 cm wide flat fabrics | as stated |
| Hardware | MSG | |
| Platform | ISS, Drop tower | |
| Years | 2014-2018 |
A dash means the sources do not state the value.
Variables varied
- ambient oxygen concentration
- ventilation flow velocity
- fuel type
- fuel thickness
- fuel geometry
- oxygen concentration
- flow velocity
- sample geometry
- sample width
- rod diameter
- flow speed
- sample thickness
- fuel material
- airflow speed
- thickness
- geometry
Variables held fixed
- pressure
- temperature
Sensors
- radiometer
- video camera
- still camera
- airspeed transducer
- thermopile detector
- Carbon Dioxide Monitor
- Compound Specific Analyzer-Combustion Products
- Major Constituents Analyzer
- oxygen sensor
- anemometer
- CO sensor
- CO2 sensor
- gas sensors
- digital camera
- Compound Specific Analyzer-Combustion Products (CSA-CP) sensor
- Major Constituents Analyzer (MCA)
- O2 sensor
- MCA
- CDM CO2 sensor
- CSA-CP CO sensor
- SAMS
Findings (53)
Key findings
The BASS-II experiments successfully utilized nitrogen dilution in the Microgravity Science Glovebox to study solid fuel combustion at reduced oxygen levels.
The global equivalence ratio for the tests was estimated to be fuel-rich, averaging 1.3, indicating under-ventilated combustion.
Heat release rates calculated from oxygen consumption were generally below 100 W for most of the tests.
The CO to CO2 ratios for these fires are an order of magnitude higher than for efficient flue gases, indicating that these flames are not efficient.
For PMMA in ambient air, this transition thickness is evaluated to be 5.2 mm.
The ejected wax droplet shown in Figure 3.1(b) typifies the flame spread hazard associated with melting plastics in microgravity.
The minimum in this boundary occurs at a = 8 to 12 s–1 at approximately 13.5 percent O2
At the bottom of the flammability map, heat losses are only 30 percent of the total heating rate to the surface, so the transition from blowoff to quenching occurs when the convective flows become the same order of magnitude as diffusive flows, shifting the critical Damköhler number residence time limitations to diffusive time limitations.
The minimum in the flammability boundary is at a of 8 to 12 s–1, where the a is modified to account for the various rod sizes tested through the gas-phase ℓ scale.
Gas-phase radiative feedback becomes an important heat transfer process that extends the flammability limit to lower a.
Based on this worst-case analysis, it is not expected that the hardware will suffer any damage from the worst-case, largest flames that could be achieved with the BASS-II samples.
In outer space, fuels burn as oval balls rather than with an upward pointed cone flame as they do on Earth.
BASS-II tests the hypothesis that materials in microgravity, with adequate ventilation, burn as well if not better than the same material in normal gravity with other conditions being identical (pressure, oxygen concentration, temperature, etc.).
BASS-II results contribute to the combustion computational models used in the design of fire detection and suppression systems in microgravity and on Earth.
The O2 sensor was out of calibration, so the MCA ISS reading was used to correct the initial ISS ‘air’ reading of the sensor for the day via a constant offset.
BASS-II testing will be scheduled around planned thruster firing or spacecraft dock or undock.
The acceleration environment will be measured by a nearby SAMS during BASS-II testing.
Ignition
Astronauts observed unique transient phenomena during ignition and near extinction that were not visible from ground observations.
The three Nomex® samples did not ignite, which is an excellent result for fire safety aboard the ISS.
At higher O2 concentrations, ignition occurred within approximately 40 s. Below an initial O2 concentration of 16 percent, the ignition delay time increased significantly.
Below an initial O2 concentration of ~14.5 percent O2, a sustained ignition could not be achieved even though flames were observed when the igniter was on and briefly after the igniter was turned off before extinguishing.
Ignition delay time increased significantly as the minimum limiting O2 concentration is approached.
Ignition limits are found to be at higher O2 concentrations than the flammability limits due to the added heat loss to the initially cold fuel rod present at ignition.
The ignition delay time can be up to almost 10 times longer than the NASA STD–6001 standard igniter on time.
A thick PMMA slab will take time to ignite and grow to a steady-state size, and the sample burning rate distribution is an important quantity to determine how much heat is being generated by the flame.
Solid fuel ignition uses a Kanthal hot wire.
In the event of a non-ignition of the rod at low O2, an opposed ignition will be attempted, followed by an ambient air opposed or concurrent test.
Flame spread
At higher opposed-flow velocities, the flame spread rate is inversely proportional to fuel thickness and independent of the flow velocity, consistent with thermal theory.
In the microgravity regime, the flame spread rate decreases as the opposed-flow velocity is reduced, eventually leading to extinction.
the spread rate is independent of opposing flow velocity Vg for thin fuels while it is proportional to Vg for thick fuels.
the average flame spread rate increases with opposed-flow velocity, even within the small range of flow velocities tested.
Decreasing the rod diameter increases the flame spread rate in both 1g and microgravity environments
Flames spread more slowly across the narrower samples, at lower flow velocities and at lower O2 percentages.
The flame shrinks to a hemispherical blue shape just before quenching.
Gas sensor data and rod mass loss estimates indicate that the flames are globally stoichiometric at higher O2 concentrations but become more globally fuel rich as the minimum O2 concentration is approached.
CO production also increases significantly at low O2 levels. The CO to CO2 ratio increases as well at low O2 concentrations.
In Figure D.6, a one-sided PMMA slab was burned at a slow flow. The 1-cm-wide sample took 7.5 min for the total test time, with the ignition taking over 1 min. Flame reached steady size in about 3 min and was only 15 mm long. The spread rate was 0.037 mm/s (0.0037 cm/s or 2.2 mm/min).
Flame appearance, flame growth, and spread rates were determined in both the opposed and concurrent flow.
Extinction
The critical flow velocity required to prevent radiative extinction is independent of the fuel thickness.
The critical extinction velocity increases significantly as the ambient oxygen concentration is reduced.
A simplified scale analysis was developed to predict the critical extinction velocity, showing good agreement with experimental and computational results.
At very high flow velocity, kinetically driven blowoff extinction was observed and at very low velocity (at about 1 cm/s) radiative extinction was observed.
While in microgravity, flame spread was observed at O2 concentrations as low as 17.5 percent, in normal gravity, flame spread was not observed below 19 percent.
Quenching extinction occurs at very low forced flows, where the flame shrinks to a hemispherical blue flame and oscillates with increasing amplitude just before going out.
Prequenching extinction oscillations at 1.1 Hz are observed with a radiometer and are similar to previously reported quiescent candle flame oscillations in microgravity.
As flow speed is increased, blowoff extinction is initiated by the formation of a hole in the flame sheet in the stagnation region of the flame.
Once the stagnation region is blown far enough downstream of the stagnation region (greater than one gas-phase thermal length ℓ), the flame is unable to propagate back upstream even when the flow is reduced.
In the quenching region, surface radiative loss dominates. Solid conductive loss down the rod is lower and decreases with decreasing stretch due to the low Peclet number.
Quenching flow velocities were found to be between 1 and 5 cm/s with higher velocity at lower O2 percentage.
As the quenching limit is approached (in this case by turning down the flow velocity), the fuel pyrolysis rate and combustion heat release rate (HRR) are reduced, and radiation loss becomes a significant fraction of the HRR from the shrinking flame. When the flame becomes small enough, conduction becomes the additional heat loss.
Brief ignition but flame extinguished before spreading beyond igniter
Extinction is observed for tests that seek to find a flammability limit.
Testing at constant O2 mole fractions permits studying flame spread and extinction at low and high flow speed.
Fire safety relevance
Understanding flammability limits and flame growth rates in microgravity helps determine the worst-case fire scenarios in space, which is critical for developing safer spacecraft materials and effective firefighting strategies.
Oxygen and airflow
Tests that state both oxygen and airflow. Ignited and extinguished marks are the outcomes the source records, so the change from one mark to the other is the limit those tests show.
- Extinguished
- Ignited
- Steady
Tests (143)
| Test | Sample | Fuel | Sample geometry | O2 (%) | Pressure (psi) | Airflow (cm/s) | Diluent | Outcome | Spread rate (mm/s) | Notes |
|---|---|---|---|---|---|---|---|---|---|---|
| PSI-25-T1 | – | polymethylmethacrylate | thin film | – | – | – | – | Extinguished | 2.2 | A steady flame was established over a 100-micrometer PMMA sample. After propagating across half the sample length at a steady spread rate of 2.2 mm/s, the flow was abruptly cut off and the flame extinguished within 2 seconds. |
| PSI-25-T2 | – | polymethylmethacrylate | thin film | – | – | 3 | – | Extinguished | – | Conducted under the same conditions as the first test but with flow velocity set at 3 cm/s. The flow was gradually reduced, and the flame extinguished at a flow velocity of about 1.1 cm/s. |
| PSI-25-T3 | M1 | polymethylmethacrylate | flat | 22.2 | – | 9 | nitrogen | Ignited | 0.071 | Thickness: 1 mm, Width: 2.2 cm, One side burning |
| PSI-25-T4 | M5 | polymethylmethacrylate | flat | 22.2 | – | 10 | nitrogen | Ignited | 0.071 | Thickness: 3 mm, Width: 2.2 cm, Two sides burning |
| PSI-25-T5 | M7 | polymethylmethacrylate | flat | 18.9 | – | 10 | nitrogen | Ignited | 0.106 | Thickness: 1 mm, Width: 1.2 cm, Two sides burning |
| PSI-25-T6 | M17 | polymethylmethacrylate | flat | 18.8 | – | 5 | nitrogen | Ignited | 0.053 | Thickness: 2 mm, Width: 2.2 cm, Two sides burning |
| PSI-25-T7 | M20 | polymethylmethacrylate | flat | 18 | – | 10 | nitrogen | Ignited | 0.012 | Thickness: 5 mm, Width: 2.2 cm, Two sides burning |
| PSI-25-T8 | Nomex test | Nomex | – | – | – | – | – | No ignition | – | The three Nomex samples did not ignite |
| PSI-25-T9 | GMT96-T7 | cotton-fiberglass fabric | flat | 21 | 14.696 | 10 | nitrogen | Steady | – | Flame reached a limiting constant length and a steady spread rate. |
| PSI-25-T10 | GMT96-T8 | cotton-fiberglass fabric | flat | 21 | 14.696 | 5 | nitrogen | Steady | – | Steady spread time lasts for about 21 s. |
| PSI-25-T11 | GMT45-T4 | cotton-fiberglass fabric | flat | 18.7 | 14.696 | 2.2 | nitrogen | Extinguished | – | Flow speed was decreased to 2.2 cm/s incrementally after ignition. The size of the flame continues to shrink until extinction is reached. |
| PSI-25-T12 | 138m | SIBAL | 2 cm | 20.8 | – | 5 | nitrogen | Ignited | – | Ignition at 5 cm/s then decrease to 2.5 cm/s and hold constant |
| PSI-25-T13 | 137m | SIBAL | 2 cm | 20.8 | – | 5 | nitrogen | Ignited | – | Ignition at 5 cm/s then decrease to 2.5 cm/s and hold constant |
| PSI-25-T14 | 146m | SIBAL | 1 cm | 20.7 | – | 5 | nitrogen | Ignited | – | Ignition at 5 cm/s, then quickly to 2 cm/s (fan pot 0.7); fuel is burned out |
| PSI-25-T15 | B1 | 100 micron PMMA film 2 cm wide | – | 22.2 | – | – | – | Not stated | – | Sample #: 147, Fan display: 62, Air display: 5 |
| PSI-25-T16 | B2 | 200 micron PMMA film 2 cm wide | – | 22.2 | – | – | – | Not stated | – | Sample #: 155, Fan display: 62, Air display: 5 |
| PSI-25-T17 | B3 | 100 micron film 2 cm wide | – | 22.2 | – | – | – | Not stated | – | Sample #: 148, Fan display: 47, Air display: 2 |
| PSI-25-T18 | B4 | 300 micron PMMA film 2 cm wide | – | 22.2 | – | – | – | Not stated | – | Sample #: 159, Fan display: 61, Air display: 5 |
| PSI-25-T19 | B5 | 200 micron 2 cm wide | – | 22.2 | – | – | – | Not stated | – | Sample #: 156, Fan display: 59, Air display: 5 |
| PSI-25-T20 | B6 | 2 cm 0.1 mm PMMA film | – | 21 | – | – | – | Not stated | – | Sample #: 153m, Fan display: 0.9 1.3 2.75, Air display: 3 5 approaching 10 |
| PSI-25-T21 | B7 | 400 micron film 2 cm wide | – | 22.2 | – | – | – | Not stated | – | Sample #: 161, Fan display: 47, Air display: 2 |
| PSI-25-T22 | B8 | 2 cm 0.2 mm PMMA film | – | 21 | – | – | – | Not stated | – | Sample #: 157m, Fan display: 1.4 incr to 10.0, Air display: 10 max |
| PSI-25-T23 | B9 | 2 cm 0.1 mm PMMA film | – | 21 | – | – | – | Not stated | – | Sample #: 154m, Fan display: 0.6 0.35, Air display: 2 <1 |
| PSI-25-T24 | B10 | 1 cm 0.2 mm PMMA film | – | 21 | – | – | – | Not stated | – | Sample #: 173m, Fan display: 1.7 (52) 1.25 0.9 0.6 0.4 0.35, Air display: 5 4 3 2 1 |
| PSI-25-T25 | B11 | 2 cm 0.2 mm PMMA film | – | 21 | – | – | – | Not stated | – | Sample #: 158m, Fan display: 2.5 (59) 1.3 0.7 0.5 0.35, Air display: 5 3 1 <1 |
| PSI-25-T26 | B12 | 300 micron film 2 cm wide | – | 22.2 | – | – | – | Not stated | – | Sample #: 160, Fan display: 46.5, Air display: 2 |
| PSI-25-T27 | B13 | 2 cm 0.4 mm thick film | – | 21 | – | – | – | Not stated | – | Sample #: 162m, Fan display: 3.5 (68) 1.7 1.25 0.9 0.6 0.4 0.35, Air display: 10 5 4 3 2 1 |
| PSI-25-T28 | B14 | 1 cm wide 200 micron thick PMMA | – | 15 | – | – | – | Not stated | – | Sample #: 174m, Fan display: pot 0.9 0.5 and down, Air display: 5 3 2 ext |
| PSI-25-T29 | B15 | 2 cm 0.1 mm PMMA film | – | 21 | – | – | – | Not stated | – | Sample #: 149m, Fan display: 1.4 (50) incr to 10.0 pot, Air display: 10 max |
| PSI-25-T30 | B16 | 2 cm 100 micron thick PMMA | – | 17.3 | – | – | – | Not stated | – | Sample #: 150m, Fan display: 44 (pot 0.68), Air display: 3 0.5 pot 0.4 pot |
| PSI-25-T31 | B17 | 1 cm wide 200 micron thick PMMA | – | 17.5 | – | – | – | Not stated | – | Sample #: 175m, Fan display: pot 1.2 (48) 0.9 0.4 , Air display: 5 3 pot 0.4 |
| PSI-25-T32 | B18 | 1 cm wide 200 micron thick PMMA | – | 17.4 | – | – | – | Not stated | – | Sample #: 176m, Fan display: pot 1.02 (47) incr to 7.0, Air display: 10 blowoff |
| PSI-25-T33 | B19 | 2 cm 100 micron thick PMMA | – | 17.3 | – | – | – | Not stated | – | Sample #: 151m, Fan display: 47 (pot 1.05) incr to pot 6.0, Air display: 10 blowoff |
| PSI-25-T34 | B20 | 2 cm 100 micron thick PMMA | – | 17.4 | – | – | – | Not stated | – | Sample #: 152m, Fan display: 48 pot 0.9 0.5, Air display: 5 3 pot 0.5 |
| PSI-25-T35 | B21 | 1 cm wide 200 micron thick PMMA | – | 20.8 | – | – | – | Not stated | – | Sample #: 174m, Fan display: 53 and down, Air display: 5 down to ext |
| PSI-25-T36 | B22 | 1 cm wide 200 micron thick PMMA | – | 20.7 | – | – | – | Not stated | – | Sample #: 176m, Fan display: 53 42 41 40.5, Air display: 5 2 0 |
| PSI-25-T37 | F1 | Nomex natural (nomex III) | – | 22.2 | – | – | – | Not stated | – | Sample #: 227, Fan display: 82, Air display: 9.5 |
| PSI-25-T38 | F2 | Nomex natural (nomex III) | – | 21 | – | – | – | Not stated | – | Sample #: 228m, Fan display: 92, Air display: 15 |
| PSI-25-T39 | F3 | Nomex natural (nomex III) | – | 21.7 | – | – | – | Not stated | – | Sample #: 229m, Fan display: 61, Air display: 8 |
| PSI-25-T40 | F4 | Japan Wax candle | – | 17.4 | – | – | – | Not stated | – | Sample #: 39M, Fan display: see notes, Air display: 3 ign |
| PSI-25-T41 | M1 | 1 mm thick PMMA 1 sided 2 cm | – | 22.2 | – | – | – | Not stated | – | Sample #: 222, Fan display: 58 54, Air display: 10 8 |
| PSI-25-T42 | M2 | 3 mm thick PMMA 1 sided 2 cm wide | – | 22.2 | – | – | – | Not stated | – | Sample #: 224, Fan display: 116 (pot 9.3) 89 80 84, Air display: 20 15 13 14 |
| PSI-25-T43 | M3 | 2 cm wide 5 mm thick 1 sided PMMA | – | 20.8 | – | – | – | Not stated | – | Sample #: 226m, Fan display: 3.0 3.1 3.2 6.4 5.5 5.4, Air display: 10 20 18 |
| PSI-25-T44 | M4 | 5 mm thick PMMA 2 cm wide | – | 21.8 | – | – | – | Not stated | – | Sample #: 171m, Fan display: 52 47 43, Air display: 5 4 3 |
| PSI-25-T45 | M5 | 3 mm thick PMMA 2 sided 2 cm thick | – | 22.2 | – | – | – | Not stated | – | Sample #: 167, Fan display: null, Air display: 20 13 10 8 5 |
| PSI-25-T46 | M6 | 1 mm thick PMMA 2 cm wide | – | 21.8 | – | – | – | Not stated | – | Sample #: 163m, Fan display: 68 52 47 43 42 41, Air display: 10 5 3 0 |
| PSI-25-T47 | M7 | 1 cm wide PMMA 1 mm thick | – | 18.9 | – | – | – | Not stated | – | Sample #: 177m, Fan display: 2.6 1.3 0.8 0.7 0.6 0.5; 60 49 45 44 43 42, Air display: 10 6 5 4.5 4 3 |
| PSI-25-T48 | M8 | 1 cm wide PMMA 2 mm thick | – | 19.1 | – | – | – | Not stated | – | Sample #: 178m, Fan display: 3.3 1.6 1.0 decr, Air display: 10 5>7 5 decr |
| PSI-25-T49 | M9 | 1 cm wide PMMA 3 mm thick | – | 18 | – | – | – | Not stated | – | Sample #: 179m, Fan display: 3.3 4.8;66 79, Air display: 10 14 |
| PSI-25-T50 | M10 | 4 mm thick 1 cm wide PMMA slab | – | 20.1 | – | – | – | Not stated | – | Sample #: 180m, Fan display: 75 105 94/91 72/69 63/61 (4.4 8.0 6.6/6.3 4.0/3.7 3/0/2.7), Air display: 10 17 14 10 8 |
| PSI-25-T51 | M11 | 1 cm wide PMMA 5 mm thick | – | 20 | – | – | – | Not stated | – | Sample #: 181m, Fan display: 3.9 6.5 4.6 3.3 2.9 2.8; 62.5 93 77 66 63 62, Air display: 10 20 15 12 |
| PSI-25-T52 | M12 | 2 mm thick PMMA 2 cm wide | – | 21.7 | – | – | – | Not stated | – | Sample #: 165m, Fan display: 41 42 41, Air display: <1 |
| PSI-25-T53 | M13 | 4 mm thick PMMA 2 cm wide | – | 20.8 | – | – | – | Not stated | – | Sample #: 169m, Fan display: 52 47 43, Air display: 6 5 4 |
| PSI-25-T54 | M14 | 2mm thick PMMA 1 sided 2 cm wide | – | 22.2 | – | – | – | Not stated | – | Sample #: 223, Fan display: pot 2.4 1.87 (54), Air display: 10 ~8 |
| PSI-25-T55 | M15 | 2 cm 4 mm 1 sided PMMA slab | – | 21 | – | – | – | Not stated | – | Fan display: ignited 10 adjusted down then up to 20 down in incrments to 15. Air display: 10 8 7 8 10 20 18 16 15. Calibrated final O2 % by vol: 20. |
| PSI-25-T56 | M16 | 1 mm thick PMMA 2 cm wide | – | 19.2 | – | – | – | Not stated | – | Fan display: 73 57 59 48 45 43 75 (4.2 2.2 2.4 1.2 0.8 0.5 4.4). Air display: 10 6 3 2 1 10. Calibrated final O2 % by vol: 18.7. |
| PSI-25-T57 | M17 | 2 cm wide PMMA 2 mm thick | – | 18.8 | – | – | – | Not stated | – | Fan display: Fan pot 3.7 1.7 1.5 1.3 0.8 0.6 0.5 0.3ext. Air display: 10 5 3 0ext. Calibrated final O2 % by vol: 17.1. |
| PSI-25-T58 | M18 | 2 cm wide PMMA 3 mm thick | – | 17.9 | – | – | – | Not stated | – | Fan display: Fan pot 3.5 5 (brief) 3 5 2.2. Air display: 10 15 (brief) 10 8. Calibrated final O2 % by vol: 16.8. |
| PSI-25-T59 | M19 | 4 mm thick 2 cm 2ide PMMA slab | – | 19 | – | – | – | Not stated | – | Fan display: 75 105 94 75 77 79 59 61 57 55 53 (4.4 8.0 6.6 4.4 4.6 4.8 2.5 2.7 2.2 2.0 1.8). Air display: 10 17 14 10 7 5. Calibrated final O2 % by vol: 17.4. |
| PSI-25-T60 | M20 | 5 mm thick PMMA 2 cm wide | – | 18 | – | – | – | Not stated | – | Fan display: 67 58. Air display: 10 8. Calibrated final O2 % by vol: 17.4. |
| PSI-25-T61 | O1 | 1/4" clear rod | – | 22.2 | – | – | – | Not stated | – | Fan display: 89 62 50 41. Air display: 20 10 5 2 1. Calibrated final O2 % by vol: 21.7. |
| PSI-25-T62 | O2 | 1/4" clear rod | – | 22.2 | – | – | – | Not stated | – | Fan display: .54 pot 0.45 pot. Air display: 0. Calibrated final O2 % by vol: 21.9. |
| PSI-25-T63 | O3a | 1/4" clear rod | – | 18 | – | – | – | Not stated | – | Air display: 5 3. Calibrated final O2 % by vol: 18. |
| PSI-25-T64 | O3b | 1/4" clear rod | – | 18 | – | – | – | Not stated | – | Air display: 5 3 2 1 low. Calibrated final O2 % by vol: 17.7. |
| PSI-25-T65 | O4 | 3/8"clear rod | – | 14.8 | – | – | – | Not stated | – | Fan display: 5 0.7 0.5 0.4 0.36 ext. Air display: 5 down to ext. Calibrated final O2 % by vol: 13.6. |
| PSI-25-T66 | O5a | 1/2" clear PMMA rod | – | 15.1 | – | – | – | Not stated | – | Fan display: 1.3 2.7 1.3 0.7 0.45. 4.0. Air display: 5 10 5 2 0 (49 62 49 44 42). Calibrated final O2 % by vol: 14.2. |
| PSI-25-T67 | O5b | 1/2" clear PMMA rod | – | 14.2 | – | – | – | Not stated | – | Fan display: 1.3. Air display: 49 5 cm/s. Calibrated final O2 % by vol: 14.1. |
| PSI-25-T68 | O6 | 1/4" clear rod | – | 16.7 | – | – | – | Not stated | – | Fan display: 5 .36 .32 .31 .305 out .275. Air display: see fan. Calibrated final O2 % by vol: 16. |
| PSI-25-T69 | O7 | 1/4" clear rod | – | 16 | – | – | – | Not stated | – | Fan display: 5 .36 .32 ..305 blowoff fan max 10. Calibrated final O2 % by vol: 15.5. |
| PSI-25-T70 | O8a | 1/4" clear rod | – | 15.7 | – | – | – | Extinguished | – | Fan display: 5 .36 .32 .31 extinguished. Calibrated final O2 % by vol: 15.3. |
| PSI-25-T71 | O8b | 1/4" clear rod | – | 15.5 | – | – | – | Not stated | – | Fan display: 5 .36 .32 .31 blowoff fan pot 6.0. Calibrated final O2 % by vol: 15.2. |
| PSI-25-T72 | O9 | 1/4" clear rod | – | 15 | – | – | – | Not stated | – | Fan display: 5 .36 .32 blowoff pt 4.0. Calibrated final O2 % by vol: 14.8. |
| PSI-25-T73 | O10 | 1/4" clear rod | – | 16.7 | – | – | – | Not stated | – | Fan display: 49 44 41 122 (1.3 0.7 0.4 0.36 0.32 10). Air display: 5 2 0 max. Calibrated final O2 % by vol: 16.1. |
| PSI-25-T74 | O11 | 1/4" black rod | – | 15.4 | – | – | – | Not stated | – | Fan display: ign 5 0.36 0.32 0.31 0.305 blowoff 6.0. Air display: 5 down then blowoff. Calibrated final O2 % by vol: 14.8. |
| PSI-25-T75 | O12 | 3/8" clear rod | – | 13.6 | – | – | – | No ignition | – | Fan display: pots 1.4 3 0.9 0.7. Air display: no ign at any flow. Calibrated final O2 % by vol: 13.5. |
| PSI-25-T76 | O13a | 1/2" clear PMMA rod | – | 15.9 | – | – | – | Not stated | – | Fan display: 1.3 0.7 0.45 0.36 0.32 0.31. Air display: 49 44 42 41 41 40.5 (5 2 0). Calibrated final O2 % by vol: 14.6. |
| PSI-25-T77 | O13b | 1/2" clear PMMA rod | – | 14.6 | – | – | – | Not stated | – | Fan display: 1.3 0.9. Air display: 7 4? (49 ?). Calibrated final O2 % by vol: 14.4. |
| PSI-25-T78 | O14 | 1/4" black rod | – | 16.3 | – | – | – | Not stated | – | Fan display: 52 and down. Air display: 5 down to ext. Calibrated final O2 % by vol: 15.3. |
| PSI-25-T79 | O15a | 3/8" clear rod | – | 17.1 | – | – | – | Not stated | – | Fan display: 57.5 47 42 41 (2.3 1.0 0.5 0.35 0.32). Air display: 5 0. Calibrated final O2 % by vol: 16.7. |
| PSI-25-T80 | O15b | 3/8" clear rod | – | 16.7 | – | – | – | Not stated | – | Fan display: 57.5 42 41 40 (2.3 0.5 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.27). Air display: 5 0. Calibrated final O2 % by vol: 15.6. |
| PSI-25-T81 | O16 | 3/8"clear rod | – | 14.5 | – | – | – | Not stated | – | Fan display: 60 (2.6). Air display: 5. Calibrated final O2 % by vol: 14.5. |
| PSI-25-T82 | O17 | 1/4" clear rod | – | 15.1 | – | – | – | Not stated | – | Fan display: 49 46.5 44 42 41 72 decr (1.3 1.0 0.7 0.5 0.4 4.0 decr ). Air display: 3 0 11. Calibrated final O2 % by vol: 14.3. |
| PSI-25-T83 | O18 | 1/4" clear rod | – | 15.2 | – | – | – | Not stated | – | Fan display: 57 51 47 72 51 72 51 47 (2.3 1.5 1.0 4.0 1.5 4.0 1.5 1.0). Air display: 5 2 0 11 2 11 2 0. Calibrated final O2 % by vol: 14.5. |
| PSI-25-T84 | O19 | 1/4" clear rod | – | 15.3 | – | – | – | Not stated | – | Fan display: 52 and down. Air display: 5 down to ext. Calibrated final O2 % by vol: 14.6. |
| PSI-25-T85 | O20 | 1/4" clear rod | – | 16.5 | – | – | – | Not stated | – | Fan display: 49 (1.3 pot) pots 7 8 9 10. Air display: 5 8 incr to max 38.5. Calibrated final O2 % by vol: 15.9. |
| PSI-25-T86 | O21 | 3/8" clear rod | – | 15.9 | – | – | – | Not stated | – | Fan display: 46 (pot 0.8) pot 7 10. Air display: incr to 28. Calibrated final O2 % by vol: 15.4. |
| PSI-25-T87 | O22 | 1/2" clear rod | – | 15.4 | – | – | – | Not stated | – | Fan display: 49 (pot 1.1) blowoff pot 5 out at fan 87. Air display: 4 incr to 26.5. Calibrated final O2 % by vol: 14.9. |
| PSI-25-T88 | P1 | 1/4" black rod | – | 17.7 | – | – | – | Not stated | – | Air display: 5 2 slow decr to ext. Calibrated final O2 % by vol: 17.5. |
| PSI-25-T89 | P2 | 1/4" black rod | – | 17.4 | – | – | – | Not stated | – | Air display: 5 2.5 2 (pot .9 .5 .35. .33). Calibrated final O2 % by vol: 17.2. |
| PSI-25-T90 | P3a | 1/4" clear rod | – | 17.7 | – | – | – | Not stated | – | Air display: 5 2.5 (1.15 .5 .35 .33. .32 .315 .31 .3). Calibrated final O2 % by vol: 17.4. |
| PSI-25-T91 | P3b | 1/4 clear rod | – | 17.4 | – | – | – | Not stated | – | Air display: 5 very low (0.85 0.32 0.31 0.305 0.30 0.295). Calibrated final O2 % by vol: 16.8. |
| PSI-25-T92 | P4 | 3/8" black rod | – | 18.5 | – | – | – | Not stated | – | Fan display: 48 41. Air display: 5 pots 0.4 0.36 0.32 0.308 .3 off. Calibrated final O2 % by vol: 17.1. |
| PSI-25-T93 | P5 | 0.5" black rod | – | 19.3 | – | – | – | Not stated | – | Fan display: Fan pot 1.5 (5cm/s) 0.9 0.4 0.36 0.32 0.308 0.3 0.29 0.28 0 ext. Air display: 5 down to ext. Calibrated final O2 % by vol: 17.6. |
| PSI-25-T94 | P6 | 1/4" black rod | – | 18.9 | – | – | – | Not stated | – | Fan display: 48 41. Air display: 5 pots 0.4 0.36 0.32 0.31 off. Calibrated final O2 % by vol: 18.5. |
| PSI-25-T95 | P8 | 3/8" black rod | – | 16.4 | – | – | – | Extinguished | – | Fan display: 48 62 75, Air display: 5 would not stay lit 10 15 ibid, Sample #: 197m |
| PSI-25-T96 | P9 | 0.5" black rod | – | 17.6 | – | – | – | Extinguished | – | Fan display: Fan pot 1.5 (5cm/s) 0.9 0.4 0.36 0.32 0.3 0.28 ext, Air display: 5 down to ext, Sample #: 202m |
| PSI-25-T97 | P10 | 1/4" black rod | – | 17 | – | – | – | Extinguished | – | Fan display: 48 41, Air display: 5 pots 0.4 0.36 0.32 0.31 0.30 extinguished, Sample #: 187m |
| PSI-25-T98 | P12 | 3/8" black rod | – | 17.5 | – | – | – | Not stated | – | Fan display: 60 52 48 44.5 42 41.5 41 (2.6 1.6 1.2 .75 .5 .4 .36 0.34), Air display: 5 3 2 1 0.5 lower, Sample #: 199m |
| PSI-25-T99 | P13a | 0.5" black rod | – | 20.7 | – | – | – | Extinguished | – | Fan display: Fan pot 1.1 (5cm/s) 0.4 0.36 0.32 0.3 0.28 0.26 0 ext, Air display: 5 down to ext, Sample #: 203m |
| PSI-25-T100 | P13b | 0.5" black rod | – | 20.6 | – | – | – | Extinguished | – | Fan display: Fan pot 1.3 (5cm/s) 0.4 0.36 0.32 ext, Air display: 5 down to ext, Sample #: 203m |
| PSI-25-T101 | P14 | 1/4 blac rod | – | 18.4 | – | – | – | Not stated | – | Fan display: 46 41, Air display: 5 low (.85 .4 .32), Sample #: 189M |
| PSI-25-T102 | P15 | 1/4 black rod | – | 18 | – | – | – | Not stated | – | Fan display: 46 41, Air display: 5 (0.36), Sample #: 190M |
| PSI-25-T103 | P16 | 1/4" black rod | – | 18.2 | – | – | – | Not stated | – | Fan display: 49 62 44 41.5 41 (pots 1.3 2.8 0.7 0.4 0.36 0.32), Air display: 5 8 2 low, Sample #: 191m |
| PSI-25-T104 | P17 | 1/4" black rod | – | 16.8 | – | – | – | Not stated | – | Fan display: 60 52 48 233 48 41 (2.6 1.6 1.2 10 1.2 0.36 0.34), Air display: 5 3 2 22 2 low, Sample #: 192m |
| PSI-25-T105 | P18 | 1/4" black rod | – | 20 | – | – | – | Not stated | – | Fan display: 55 47 etc (pot 1 2 1 2 etc), Air display: 2 0 2 0 etc, Sample #: 193m |
| PSI-25-T106 | P19 | 1/4" black rod | – | 17.5 | – | – | – | Not stated | – | Fan display: 49 62 44 41.5 122 41 (pots 1.3 2.8 0.7 0.4 0.36 10. 0.32), Air display: 5 8 2 max 0, Sample #: 194m |
| PSI-25-T107 | P20 | 1/4" black rod | – | 19 | – | – | – | Not stated | – | Fan display: 55 47 etc (pot 1 2 1 2 etc), Air display: 2 0 2 0 etc, Sample #: 195m |
| PSI-25-T108 | P21a | 1/4 black rod | – | 16.3 | – | – | – | Not stated | – | Fan display: 46, Air display: 5, Sample #: 196M |
| PSI-25-T109 | P21b | 1/4" black rod | – | 16.3 | – | – | – | Not stated | – | Fan display: 46, Air display: 5, Sample #: 196M |
| PSI-25-T110 | P22a | 3/8" black rod | – | 20.8 | – | – | – | Extinguished | – | Fan display: 5 0.36 0.32 ext after some time, Air display: 5 down to ext, Sample #: 200m |
| PSI-25-T111 | P22b | 3/8" black rod | – | 20 | – | – | – | Extinguished | – | Fan display: 5 p.36 0.34 0.33 0.32 0.31 ext, Air display: 5 down to ext, Sample #: 200m |
| PSI-25-T112 | P23 | 3/8" black rod | – | 18.2 | – | – | – | Not stated | – | Fan display: 55 47 etc (pot 1 2 1 2 etc), Air display: 2 0 2 0 etc, Sample #: 201m |
| PSI-25-T113 | P24 | 3/8" black rod | – | 19 | – | – | – | Not stated | – | Fan display: 55 47 etc (pot 1 2 1 2 etc), Air display: 2 0 2 0 etc, Sample #: 819L |
| PSI-25-T114 | P25 | 3/8" clear rod | – | 20.9 | – | – | – | Extinguished | – | Fan display: 5 p.36 0.34 0.33 0.32 0.31 ext, Air display: 5 down to ext, Sample #: 217m |
| PSI-25-T115 | T1 | 2 cm SIBAL | – | 18.5 | – | – | – | Not stated | – | Fan display: 80, Air display: 10, Sample #: 128 |
| PSI-25-T116 | T2 | 2 cm SIBAL | – | 18.5 | – | – | – | Not stated | – | Fan display: 80 59 55, Air display: 9 5 4, Sample #: 129 |
| PSI-25-T117 | T3 | 4 cm spherical section | – | 17.2 | – | – | – | Not stated | – | Fan display: 63, Air display: 10, Sample #: 182m |
| PSI-25-T118 | T4 | 2 cm SIBAL | – | 18.7 | – | – | – | Not stated | – | Fan display: 80 46, Air display: 9 1, Sample #: 130 |
| PSI-25-T119 | T5 | 2 cm SIBAL | – | 18.8 | – | – | – | Not stated | – | Fan display: 2.72 0.50 0.42, Air display: 10 2 1, Sample #: 131 |
| PSI-25-T120 | T6 | 2 cm SIBAL | – | 18.8 | – | – | – | Not stated | – | Fan display: null, Air display: 5 2 1 <1, Sample #: 132 |
| PSI-25-T121 | T7 | 4 cm spherical section | – | 17.3 | – | – | – | Not stated | – | Fan display: 3.4 67, Air display: 10 5 3 1 decr, Sample #: 182m |
| PSI-25-T122 | T9 | 2 cm SIBAL | – | 16.4 | – | – | – | Not stated | – | Fan display: pot 2.5, Air display: 10, Sample #: 133M |
| PSI-25-T123 | T10 | 2 cm SIBAL | – | 16.4 | – | – | – | Not stated | – | Fan display: pot 1.1, Air display: 5, Sample #: 134M |
| PSI-25-T124 | T11 | 2 cm SIBAL | – | 17.1 | – | – | – | Not stated | – | Fan display: 48, Air display: 5, Sample #: 135m |
| PSI-25-T125 | T12 | 2 cm SIBAL | – | 16.8 | – | – | – | Not stated | – | Fan display: pot 1.1, Air display: 5, Sample #: 136m |
| PSI-25-T126 | T13 | 2 cm SIBAL | – | 17.5 | – | – | – | Not stated | – | Fan display: null, Air display: 5 1, Sample #: 137 |
| PSI-25-T127 | T14 | 2 cm SIBAL | – | 16.9 | – | – | – | Not stated | – | Fan display: null, Air display: 5 3, Sample #: 140m |
| PSI-25-T128 | T15 | 2 cm SIBAL | – | 18.7 | – | – | – | Not stated | – | Fan display: 80122, Air display: 9 29, Sample #: 138 |
| PSI-25-T129 | T16 | 2 cm SIBAL | – | 17.6 | – | – | – | Not stated | – | Fan display: null, Air display: 5 3, Sample #: 139 |
| PSI-25-T130 | T17 | 2 cm SIBAL | – | 16.9 | – | – | – | Not stated | – | Fan display: null, Air display: 6 53, Sample #: 142m |
| PSI-25-T131 | T18 | 2 cm SIBAL | – | 17.4 | – | – | – | Not stated | – | Fan display: null, Air display: 5 2, Sample #: 141M |
| PSI-25-T132 | T19 | 1 cm SIBAL | – | 17.2 | – | – | – | Not stated | – | Fan display: 68.5 pot 3.6, Air display: 11, Sample #: 143m |
| PSI-25-T133 | T20 | 1 cm SIBAL | – | 17.2 | – | – | – | Not stated | – | Fan display: 3.6 0.9, Air display: 11 3, Sample #: 144m |
| PSI-25-T134 | T21 | 1 cm SIBAL | – | 17.2 | – | – | – | Not stated | – | Fan display: 1.6 pot 52, Air display: 11 max(47), Sample #: 145m |
| PSI-25-T135 | T22 | 1 cm SIBAL | – | 17.1 | – | – | – | Not stated | – | Sample #: 146m, Flow restrictor: 2, Fan display: 3.4 1.7, Air display: 10 5, Radiometer gain: 250, Total Frames Shot: 38, Calibrated final O2 % by vol: 17, Initial CO2 % by vol: 0.59, Final CO2 % by vol: 0.62, Initial CO (ppm): 140, Final CO (ppm): 162 |
| PSI-25-T136 | T23 | 2 cm Sibal moved igniter | – | 17.2 | – | – | – | Not stated | – | Sample #: 133m, Flow restrictor: 2, Fan display: 3.3 66, Air display: 10, Radiometer gain: 250, Total Frames Shot: 203, Calibrated final O2 % by vol: 17.3, Initial CO2 % by vol: 0.32, Final CO2 % by vol: 0.32, Initial CO (ppm): 45, Final CO (ppm): 49 |
| PSI-25-T137 | T24 | 1 cm SIBAL top side ign | – | 18.2 | – | – | – | Not stated | – | Sample #: 133m, Flow restrictor: 2, Fan display: 3.3 66, Air display: 10, Radiometer gain: 250, Total Frames Shot: 130, Calibrated final O2 % by vol: 18.2, Initial CO2 % by vol: 0.51, Final CO2 % by vol: 0.53, Initial CO (ppm): 85, Final CO (ppm): 107 |
| PSI-25-T138 | T25 | 2 cm SIBAL | – | 20.8 | – | – | – | Not stated | – | Sample #: 138m, Flow restrictor: 1, Fan display: 53 45, Air display: 5 2.5, Radiometer gain: 250, Total Frames Shot: 75, Calibrated final O2 % by vol: 20.7, Initial CO2 % by vol: 0.36, Final CO2 % by vol: 0.39, Initial CO (ppm): -1, Final CO (ppm): 17 |
| PSI-25-T139 | T26 | 2 cm SIBAL | – | 20.8 | – | – | – | Not stated | – | Sample #: 137m, Flow restrictor: 1, Fan display: 53 45, Air display: 5 2.5, Radiometer gain: 250, Total Frames Shot: 87, Calibrated final O2 % by vol: 20.7, Initial CO2 % by vol: 0.36, Final CO2 % by vol: 0.43, Initial CO (ppm): -1, Final CO (ppm): 24 |
| PSI-25-T140 | T27 | 1 cm SIBAL | – | 20.7 | – | – | – | Not stated | – | Sample #: 146m, Flow restrictor: 1, Fan display: 53 45, Air display: 5 2, Radiometer gain: 250, Total Frames Shot: 58, Calibrated final O2 % by vol: 20.6, Initial CO2 % by vol: 0.41, Final CO2 % by vol: 0.42, Initial CO (ppm): -1, Final CO (ppm): 9 |
| PSI-25-T141 | T28a | 1 cm SIBAL | – | 20.7 | – | – | – | Not stated | – | Sample #: 144m, Flow restrictor: 1, Fan display: 53, Air display: 5, Radiometer gain: 250, Total Frames Shot: 19, Calibrated final O2 % by vol: 0.9, Initial CO2 % by vol: 0.41, Final CO2 % by vol: none, Initial CO (ppm): -1, Final CO (ppm): none |
| PSI-25-T142 | T28b | 1 cm SIBAL | – | 20.7 | – | – | – | Not stated | – | Sample #: 144m, Flow restrictor: 1, Fan display: 53, Air display: 5, Radiometer gain: 250, Total Frames Shot: 27, Calibrated final O2 % by vol: 40.4, Initial CO2 % by vol: none, Final CO2 % by vol: 0.42, Initial CO (ppm): none, Final CO (ppm): 2 |
| PSI-25-T143 | T29 | 1 cm SIBAL | – | 20.7 | – | – | – | Not stated | – | Sample #: 145m, Flow restrictor: 1, Fan display: 53 43, Air display: 5 2(?), Radiometer gain: 250, Total Frames Shot: 60, Calibrated final O2 % by vol: 20.5, Initial CO2 % by vol: 0.41, Final CO2 % by vol: 0.44, Initial CO (ppm): -1, Final CO (ppm): 10 |
Sources (33)
- PSI-25 Experimental table BASS-II, p. 1
- PSI-25 Reports BASS-II Summary Report, p. 1
- PSI-25 Reports BASS-II Summary Report, p. 44
- PSI-25 Reports BASS-II Summary Report, p. 48
- PSI-25 Reports BASS-II Summary Report, p. 52
- PSI-25 Reports BASS-II Summary Report, p. 54
- PSI-25 Reports BASS-II Summary Report, p. 56
- PSI-25 Reports BASS-II Summary Report, p. 59
- PSI-25 Reports BASS-II Summary Report, p. 65
- PSI-25 Reports BASS-II Summary Report, p. 68
- PSI-25 Reports BASS-II Summary Report, p. 72
- PSI-25 Reports BASS-II Summary Report, p. 83
- PSI-25 Reports BASS-II Summary Report, p. 97
- PSI-25 Reports BASS-II Summary Report, p. 98
- PSI-25 Reports BASS-II Summary Report, p. 101
- PSI-25 Reports BASS-II Summary Report, p. 102
- PSI-25 Reports BASS-II Summary Report, p. 103
- PSI-25 Reports BASS-II Summary Report, p. 106
- PSI-25 Reports BASS-II Summary Report, p. 108
- PSI-25 Reports BASS-II Summary Report, p. 121
- PSI-25 Reports BASS-II Summary Report, p. 123
- PSI-25 Reports BASS-II Summary Report, p. 129
- PSI-25 Reports BASS-II Summary Report, p. 130
- PSI-25 Reports BASS-II Summary Report, p. 134
- PSI-25 Reports BASS-II Summary Report, p. 135
- Burning and Suppression of Solids - II, p. 1 (DOI)
- PSI-25 Science Documents BASS-II SRD, p. 1
- PSI-25 Science Documents BASS-II SRD, p. 2
- PSI-25 Science Documents BASS-II SRD, p. 3
- PSI-25 Science Documents BASS-II SRD, p. 9
- PSI-25 Science Documents BASS-II SRD, p. 12
- PSI-25 Science Documents BASS-II ReadMe, p. 1
- PSI-25 Science Documents BASS-II Test.Matrices, p. 1